The automated systems have been installed in the mill, if the price / performance ratio was profitable. Automatic can changing devices are on cards and drawing frames become the standard, as are the automated systems on flyers and doffing of textile machines.
As the connections between the different machines and material handling, won the following systems soil: first link between lap winding and combing machine for Transport and Second Round, transportation system for the roving bobbin with bobbin-changing six or three units.
An overhead trolley from the coil produced by the Flyers, in a number corresponding to one sixth of the spindles and send it set out on an overhead storeroom before the spin machine. With the same system, the empty shells from the spinning machine and took away the flyer.
Also, robotic systems for the unloading of reels of the open-end spinning machines and the curlers and their loading on pin car or on pallets. These last, when cones are full, with a polyethylene film, weighed, wrapped and labeled. These facilities are located at the end of the machine or be placed in fixed positions is fed through a coil transport.